Aivituvin Large Rabbit Hutch XZ7001 with Run and Waterproof Roof

XZ7001: Large Rabbit Hutch with Integrated Run, Opening Roof, and Waterproof Cover

The Aivituvin XZ7001 is built from solid fir wood with reinforced corner joints — a material and construction choice that shows in how this hutch feels compared to thinner, lighter alternatives. It combines a spacious lower activity area where rabbits can move and forage with an upper enclosed room for sleeping and privacy, all in a single self-contained unit with an integrated run, deep no-leak tray, and a fully opening roof for easy access top-to-bottom.

Key Features

• Solid Fir Wood Construction: Denser and more durable than standard pine, the fir wood frame resists warping and moisture damage better over time — especially important for a hutch that will live outdoors.
• Reinforced Corner Joints: Corner reinforcements prevent the frame from racking or loosening over months of use, keeping the hutch square and structurally sound through repeated cleaning.
• Upper Room + Lower Activity Area: The two-zone layout gives rabbits a private sleeping space above and an open run-connected activity area below — mimicking the natural rabbit behaviour of separating sleep and active zones.
• Deep No-Leak Tray: A single deep pull-out tray catches all waste from the lower area; its raised edges prevent liquid seeping onto the floor below the hutch.
• Opening Roof Panel: The top lifts fully open for top-down access — ideal for health checks, adding hay, or removing a rabbit that won’t come through a door willingly.
• 4 Wheels with Locks: Roll the hutch on any hard surface and lock it in place; useful for weekly deep cleans that require moving the hutch away from its usual spot.

Space Guide: Which Rabbits Suit the XZ7001?

The XZ7001’s combined lower run area and upper room give it a usable space suitable for 2 medium rabbits (Dutch, Rex, Lionhead) as a primary enclosure, or 3–4 small rabbits with access to additional run time. The RWAF recommends at least 3 m² for a bonded pair — the XZ7001’s integrated run helps meet this when combined with the upper room. For large breeds such as Flemish Giants or New Zealand Whites, a bigger footprint like the AIR28 (17.46 ft²) is a better fit. The solid wood construction also makes this hutch suitable for year-round outdoor use in temperate climates.

Cleaning and Maintenance

The deep pull-out tray handles daily waste removal — slide it out, empty, rinse, and replace. Weekly, open the roof and use the top-down access to scrub the upper room and ramps with a pet-safe disinfectant. Hose down the tray and allow it to dry before reinserting. Monthly, inspect the corner joints and the underside of the roof panel for any moisture accumulation. The solid fir construction benefits from an annual application of pet-safe wood preservative on all exterior surfaces to maintain weather resistance.

Frequently Asked Questions

How is the XZ7001 different from the XZ7002?
Both are large-format fir wood hutches, but the XZ7001 features an integrated lower run area within its footprint while the XZ7002 focuses more on the enclosed upper and lower rooms. If you want the run built in, choose the XZ7001; if you prefer a more traditional hutch-only design, the XZ7002 is the alternative.

Is the opening roof easy to use with one hand?
The roof panel is hinged and lifts with moderate effort — easier with two hands for a full open, but accessible one-handed for quick top-ups of hay or water. The panel stays open without a prop once fully raised.

Can this hutch stay outside through winter?
Yes — the solid fir construction and waterproof roof handle year-round outdoor placement well in temperate climates. In very cold regions, add extra hay bedding in the upper room and use a hutch cover for the mesh panels during hard frosts.

Does the tray cover the full floor area?
The tray covers the lower activity area where most waste accumulates. The upper room uses solid board flooring with bedding that is changed during weekly deep cleans.