Aivituvin Small Outdoor Rabbit Hutch AIR01-B with Wire Floor and Deep Tray, 3.1 ft²

AIR01-B: 3.1 ft² Compact Rabbit Hutch with Wire Floor, Deep Leak-Proof Tray, and Built-In Divider

The Aivituvin AIR01-B is the entry point to the AIR range — a 3.1 ft² compact hutch with a wire mesh floor, a deep leak-proof pull-out tray, and a built-in divider that creates two separate zones within the limited footprint. Pre-drilled holes and straightforward assembly mean you can have it set up in minutes rather than spending an afternoon with an instruction manual. This is a hutch designed for one or two very small pets — dwarf rabbits, guinea pigs, or similar-sized animals — used as part of a broader daily care routine that includes significant time outside the hutch for exercise.

Key Features

• Built-in divider: A removable partition creates two separate zones within the hutch — useful for introducing a new pet alongside an existing one, providing a separate sleeping nook, or giving your rabbit a sense of security with a partially enclosed area to retreat into.
• Wire mesh floor: Raised wire base lets waste fall through to the tray below, keeping the surface your rabbit stands on cleaner and drier between daily tray changes.
• Deep leak-proof pull-out tray: The high sides of the tray prevent soiled bedding from spilling as it slides out — a small detail that makes a meaningful difference when cleaning up daily.
• Pre-drilled quick assembly: All connection points are pre-drilled and labelled, significantly reducing assembly time compared to hutches where you drill your own pilot holes — important when you are setting up same-day as the rabbit arrives.
• Compact footprint: At 3.1 ft², this hutch fits on a table, a shelf unit, or a small corner of a room — useful in apartments or smaller homes where floor space is limited.
• Multi-pet compatibility: Suitable for dwarf rabbits, guinea pigs, hamsters, and other similarly-sized small animals — the basic wire-floor-plus-tray design is appropriate across species.

Space Guide: Is the AIR01-B Enough for My Pet?

At 3.1 ft², the AIR01-B is one of the smallest hutches in the Aivituvin range and is sized appropriately for one dwarf rabbit (Netherland Dwarf, Dwarf Hotot, Polish) as a sleeping and hiding space — not as a full-day habitat. The Rabbit Welfare Association & Fund’s minimum recommendation of 3 metres × 2 metres × 1 metre is well beyond what any compact hutch provides alone. The AIR01-B works best as a secure overnight shelter within a care routine that includes several hours of supervised or free-roam exercise time each day. If you need more space from day one, the AIR24 (4.84 ft² with integrated run) or the AIR53 (6.49 ft² with separate activity zone) provide meaningfully more room without requiring a separate exercise pen.

Cleaning and Maintenance

Daily: pull out the tray and empty it — the quick release and deep sides make this a 30-second task. Refresh hay and water. The wire mesh floor means you rarely need to scrub the floor surface itself; most waste falls through cleanly. Weekly: remove the tray fully and rinse with warm water and pet-safe disinfectant; dry before reinserting. Wipe the wire mesh with a damp cloth if debris has stuck. Remove and wipe the divider panel with disinfectant solution. Monthly: check the latch on the access door operates smoothly and that the wire mesh has no bent or sharp sections from chewing activity.

Frequently Asked Questions

Can the divider be removed to create a single open space?
Yes — the divider is removable, giving you the choice of one open 3.1 ft² area or two smaller zones. Most owners start with it removed and add it back if introducing a second animal or if their rabbit seems to prefer a partially enclosed sleeping area.

Is the AIR01-B suitable as a long-term home for a rabbit?
The AIR01-B is best used as part of a wider setup where the rabbit spends significant time outside the hutch each day. As a standalone permanent enclosure without additional exercise access, 3.1 ft² is insufficient for any rabbit’s welfare. Rabbit welfare organisations are consistent on this point: hutches of this size need a connected run or a larger living area as part of the system, not as an occasional bonus.

How does assembly compare to other Aivituvin hutches?
The pre-drilled holes are the main advantage over flat-pack competitors where self-drilling is required. Most reviewers report the AIR01-B taking 15-20 minutes to assemble compared to 45-90 minutes for hutches without pre-drilled fixings. All hardware is included; you only need a screwdriver.

Can I use the AIR01-B as a travel carrier?
It is not designed as a carrier — it does not have a handle and the wire panels are not secured for vehicle transport. For vet visits or travel, a dedicated pet carrier is safer. The AIR01-B works well as a temporary housing setup at a second location (a holiday home, a family member’s house) where you need a quick-assembly space rather than a permanent arrangement.

What is the best way to use the divider?
Position the divider to create a smaller enclosed sleeping nook (roughly one-third of the hutch) and a more open front section. Rabbits instinctively seek enclosed spaces for sleeping and feel more secure with a partial barrier behind them. The divider also helps during initial settling-in — a new rabbit often hides behind it rather than pressing against the wire panels, reducing stress during the first few days.